E20A
SATA III 6Gb/s | 2.5 Inch
addlink E20A 2.5” SATAIII SSDs use industrial grade controller and are equipped with 112 Layer 3D TLC (BICS5) NAND flash to deliver low power consumption and high-performance SSD, making it the best industrial storage solution for embedded system. addlink E20A supports the latest LDPC ECC, advanced wear leveling, End-to-End data protection, and over-provision technology. It also optional support three low power consumption modes to ensure SSD can extended battery life efficiently.
The E20A SSD is available in 128GB to 512GB capacities and comes with addlink’s Toolbox software for easy management and real-time monitoring. It is an ideal solution for factory automation, smart retail, military, and healthcare applications.
Features
-
Support DEVSLP Mode*
-
Low Power Consumption (Max. Read/Write <1.4W)
-
LDPC with RAID ECC
-
Thermal Protection Mechanism
-
SMART Toolbox for SSD health monitoring
-
End to end data protection
-
Wide-temperature support: -40°C to 85°C
(* It’s optional function and support by specific firmware)
Application
-
Factory Automation
-
Smart Retail
-
Military/ Defense
-
Healthcare
Interface | SATA III |
Connector | 7 + 15 pin SATA |
Flash | 3D TLC |
Capacity | 64GB~512GB |
Sequential Read (up to) | 550 MB/s |
Sequential Write (up to) | 495 MB/s |
Random Read (up to) | 70k IOPS |
Random Write (up to) | 85k IOPS |
Supply (V) | 5V + -5% |
Max. Endurance | 355 TBW (512GB) |
Max. Power Consumption (R/W) | 1.25/1.4W |
Idle | 0.29W |
Shock | 1500G0-P/0.5ms duration |
Vibration | 20Hz~80Hz/1.52mm
80Hz~2000Hz/20G |
Operating Humidity | 5%-95% RH, non-condensing |
Operating Temperature (Standard) | 0°C to 70°C |
Operating Temperature (Industrial) | -40°C to 85°C |
MTBF | 2M hrs |
ToolBox Utility | Supported |
Technologies | LDPC ECC, Thermal Throttling, SLC Cache, Wear Leveling, End to end data protection, Bad block management, TRIM command, S.M.A.R.T.
|
Dimension | 100mm (L) x 69.85mm (W) x 7mm (H) |
Form Factor | 2.5" |
Solutions
Technologies & Add-On Services | |||
|---|---|---|---|
Write Protect | ○ | When the write protect function enabled, SSD Controller will ignore any write/Erase command from host and only Read is permitted. | |
Secure Erase | ● | It not only deletes the pointer/ mapping stable of the files but also resets all blocks and erases all user data. | |
Destroy Erase | ○ | Erase mapping table, user data, and device firmware | |
DEVSLP Mode | ○ | Electronic devices with low power consumption features (Partial mode, Slumber Mode, and DEVSLP Mode) generally have longer battery life, no overheating issues and also decrease the energy cost for charging. | |
Advance Thermal Solution | ○ | - External or on-die thermal sensors
- Thermal Throttling to prevent SSD from overheating | |
ToolBox | ● | Self-Monitoring, Analysis and Reporting Technology, is a software that offers an easy way to analyze and manage your SSDs’ Health. |