E20CP
SATA III 6Gb/s | 2.5 Inch
addlink E20CP 2.5” SATAIII SSDs use an industrial grade controller equipped with Kioxia BICS5 pSLC NAND to deliver better endurance (up to 13,000 TBW) and higher performance SSD, making it the best industrial storage solution for embedded systems. addlink E20CP is compliant with TCG OPAL for data security. It also supports the latest LDPC ECC, advanced wear leveling, bad block management, and over-provision technology to ensure data accuracy and integrity for a longer SSD lifetime.
The E20CP SSD is available in 32GB to 256GB capacities and comes with addlink’s Toolbox software for easy management and real-time monitoring. It is an ideal solution for surveillance, edge AI, factory automation, smart retail, military, gaming, and healthcare applications.
Features
-
High Endurance pSLC Flash Technology (up to 13,000TBW - 256GB)
-
AES-256-bit Encryption & TCG-OPAL 2.0 Complaint*
-
Support DEVSLP Mode*
-
Low Power Consumption ((Max. Read/Write <1.75W)
-
LDPC with RAID ECC
-
Thermal Protection Mechanism
-
SMART Toolbox for SSD health monitoring
-
Wide-temperature support: -40°C to 85°C
(* It’s optional function and support by specific firmware)
Application
-
Surveillance/Edge AI
-
Factory Automation
-
Smart Retail
-
Military/ Defense
-
Gaming
-
Healthcare
Interface | SATA III |
Connector | 7 + 15 pin SATA |
Flash | pSLC |
Capacity | 32GB~256GB |
Sequential Read (up to) | 550 MB/s |
Sequential Write (up to) | 510 MB/s |
Random Read (up to) | 49k IOPS |
Random Write (up to) | 78.5k IOPS |
Supply (V) | 5V + -5% |
Max. Endurance | 13,000 TBW (256GB) |
Max. Power Consumption (R/W) | 1.35/1.25 |
Idle | 0.2W |
Shock | 1500G0-P/0.5ms duration |
Vibration | 20Hz~80Hz/1.52mm
80Hz~2000Hz/20G |
Operating Humidity | 5%-95% RH, non-condensing |
Operating Temperature (Standard) | 0°C to 70°C |
Operating Temperature (Industrial) | -40°C to 85°C |
MTBF | 3M hrs |
Security (Optional) | TCG OPAL 2.0 Compliant |
ToolBox Utility | Supported |
Technologies | LDPC ECC, Thermal Throttling, SLC Cache, Wear Leveling, Bad block management, TRIM command, S.M.A.R.T.
|
Dimension | 100mm (L) x 69.85mm (W) x 7mm (H)
|
Form Factor | 2.5" |
Solutions
Technologies & Add-On Services | |||
|---|---|---|---|
Destroy Erase | ○ | It erases the mapping table, user data, and also SSD firmware. | |
TCG OPAL 2.0 | ○ | Support AES 256bit hardware-based self-encryption and fully compliant with Trusted Computing Group (TCG) Opal Specification. | |
Write Protect | ○ | When the write protect function enabled, SSD Controller will ignore any write/Erase command from host and only Read is permitted. | |
Secure Erase | ● | It not only deletes the pointer/ mapping stable of the files but also resets all blocks and erases all user data. | |
Crypto Erase | ○ | Erase: table + Data (for support OPAL 2.0 SSD) | |
DEVSLP Mode | ○ | Electronic devices with low power consumption features (Partial mode, Slumber Mode, and DEVSLP Mode) generally have longer battery life, no overheating issues and also decrease the energy cost for charging. | |
Advance Thermal Solution | ○ | - External or on-die thermal sensors
- Thermal Throttling to prevent SSD from overheating | |
ToolBox | ● | Self-Monitoring, Analysis and Reporting Technology, is a software that offers an easy way to analyze and manage your SSDs’ Health. |