top of page
SATA 2280.png

E25CP

SATA III 6Gb/s | M.2 2280

addlink E25CP M.2 2280 SATAIII SSDs use an industrial grade controller equipped with Kioxia BICS5 pSLC NAND deliver better endurance (up to 13,000 TBW) and higher performance SSD, making it the best industrial storage solution for embedded system. addlink E25CP is compliant with TCG OPAL for data security and supports the latest LDPC ECC, advanced wear leveling, and over-provision technology. It also optionally supports three low power consumption modes to ensure SSD can extend battery life efficiently. 

The E25CP SSD is available in 32GB to 256GB capacities and comes with addlink’s Toolbox software for easy management and real-time monitoring. It is an ideal solution for surveillance, edge AI, factory automation, smart retail, military, gaming, and healthcare applications.

color BG.jpg

Features

  • High Endurance pSLC Flash Technology (up to 13,000TBW - 256GB) 

  • AES-256-bit Encryption & TCG-OPAL 2.0 Complaint*

  • Support DEVSLP Mode* 

  • Low Power Consumption (Max. Read/Write  <1.32W)

  • LDPC with RAID ECC

  • Thermal Protection Mechanism

  • SMART Toolbox for SSD health monitoring

  • Wide-temperature support: -40°C to 85°C

 (* It’s optional function and support by specific firmware)

Application

  • Surveillance/Edge AI

  • Factory Automation

  • Smart Retail

  • Military/ Defense

  • Gaming

  • Healthcare

Interface
SATA III
Connector
M.2 with B+M Key SATA Pin-out
Flash
pSLC
Capacity
32GB~256GB
Sequential Read (up to)
550 MB/s
Sequential Write (up to)
510 MB/s
Random Read (up to)
49.5K IOPS
Random Write (up to)
78.5k IOPS
Supply (V)
3.3V + -5%
Max. Endurance
13,000 TBW (256GB)
Max. Power Consumption (R/W)
1.32/1.2 W
Idle
0.175W
Shock
1500G0-P/0.5ms duration
Vibration
20Hz~80Hz/1.52mm
80Hz~2000Hz/20G
Operating Humidity
5%-95% RH, non-condensing
Operating Temperature (Standard)
0°C to 70°C
Operating Temperature (Industrial)
-40°C to 85°C
MTBF
3M hrs
Security (Optional)
TCG OPAL 2.0 Compliant
ToolBox Utility
Supported
Technologies
LDPC ECC, Thermal Throttling, SLC Cache, Wear Leveling, Bad block management, TRIM command, S.M.A.R.T.
Dimension
80.00mm (L) x 22mm (W) x 1. 35 mm (H)
Form Factor
M.2 2280

Solutions

Technologies & Add-On Services
Destroy Erase
It erases the mapping table, user data, and SSD firmware.
TCG OPAL 2.0
Support AES 256bit hardware-based self-encryption and fully compliant with Trusted Computing Group (TCG) Opal Specification.
Write Protect
When the write protect function enabled, SSD Controller will ignore any write/Erase command from host and only Read is permitted.
Quick Erase
Erase pointer/mapping table
Secure Erase
It not only deletes the pointer/ mapping stable of the files but also resets all blocks and erases all user data.
Crypto Erase
Erase: table + Data (for support OPAL 2.0 SSD)
DEVSLP Mode
Electronic devices with low power consumption features (Partial mode, Slumber Mode, and DEVSLP Mode) generally have longer battery life, no overheating issues and also decrease the energy cost for charging.
Advance Thermal Solution
- External or on-die thermal sensors - Thermal Throttling to prevent SSD from overheating
ToolBox
Self-Monitoring, Analysis and Reporting Technology, is a software that offers an easy way to analyze and manage your SSDs’ Health.
●  Default Implemented      ○  On Request 
bottom of page