top of page
CFast.png

E26C

SATA III 6Gb/s | CFast Card

addlink E26C CFast SATA Solid State Disk (SSD) use industrial grade controller and is equipped with 112 Layer 3D TLC (BICS5) NAND flash to deliver low power consumption and high-performance SSD, making it the best industrial storage solution for embedded system. addlink E26C is compliant with TCG OPAL for data security and supports the latest LDPC ECC, advanced wear leveling, and over-provision technology. It also optionally supports three low power consumption modes to ensure SSD can extend battery life efficiently. 

 

The E26C SSD is available in 64GB to 1TB capacities and comes with addlink’s Toolbox software for easy management and real-time monitoring. It is an ideal solution for surveillance, edge AI, factory automation, and gaming applications.

color BG.jpg

Features

  • AES-256-bit Encryption & TCG-OPAL 2.0 Complaint*

  • Support DEVSLP Mode* 

  • Low Power Consumption (Max. Read/Write  <1.4W)

  • LDPC with RAID ECC

  • Thermal Protection Mechanism

  • SMART Toolbox for SSD health monitoring

  • Wide-temperature support: -40°C to 85°C

 (* It’s optional function and support by specific firmware)

Application

  • Surveillance/Edge AI

  • Factory Automation

  • Gaming

Interface
SATA III
Flash
3D TLC
Capacity
64GB~1TB
Sequential Read (up to)
550 MB/s
Sequential Write (up to)
500 MB/s
Random Read (up to)
36.5k IOPS
Random Write (up to)
57.5k IOPS
Supply (V)
3.3V + -5%
Max. Endurance
1,080 TBW (1TB)
Max. Power Consumption (R/W)
1.15/1.4W
Idle
0.180W
Shock
1500G0-P/0.5ms duration
Vibration
20Hz~80Hz/1.52mm
80Hz~2000Hz/20G
Operating Humidity
5%-95% RH, non-condensing
Operating Temperature (Standard)
0°C to 70°C
Operating Temperature (Industrial)
-40°C to 85°C
MTBF
3M hrs
Security (Optional)
TCG OPAL 2.0 Compliant
ToolBox Utility
Supported
Technologies
LDPC ECC, Thermal Throttling, SLC Cache, Wear Leveling, Bad block management, TRIM command, S.M.A.R.T.
Dimension
36.4mm (L) x 42.8mm (W) x 3.3mm (H)
Form Factor
CFast

Solutions

Technologies & Add-On Services
Write Protect
When the write protect function enabled, SSD Controller will ignore any write/Erase command from host and only Read is permitted.
Secure Erase
It not only deletes the pointer/ mapping stable of the files but also resets all blocks and erases all user data.
Crypto Erase
Erase: table + Data (for support OPAL 2.0 SSD)
TCG OPAL 2.0
Support AES 256bit hardware-based self-encryption and fully compliant with Trusted Computing Group (TCG) Opal Specification.
DEVSLP Mode
Electronic devices with low power consumption features (Partial mode, Slumber Mode, and DEVSLP Mode) generally have longer battery life, no overheating issues and also decrease the energy cost for charging.
Advance Thermal Solution
- External or on-die thermal sensors - Thermal Throttling to prevent SSD from overheating
ToolBox
Self-Monitoring, Analysis and Reporting Technology, is a software that offers an easy way to analyze and manage your SSDs’ Health.
●  Default Implemented      ○  On Request 
bottom of page