E21CP
SATA III 6Gb/s | mSATA
addlink E21CP mSATA SATAIII SSDs use industrial grade controller and is equipped with Kioxia BICS5 pSLC NAND deliver better endurance (up to 13,000 TBW) and higher performance SSD, making it the best industrial storage solution for embedded system. addlink E21CP is compliant with TCG OPAL for data security and supports the latest LDPC ECC, advanced wear leveling, and over-provision technology. It also optionally supports three low power consumption modes to ensure SSD can extend battery life efficiently.
The E21CP SSD is available in 32GB to 256GB capacities and comes with addlink’s Toolbox software for easy management and real-time monitoring. It is an ideal solution for surveillance, edge AI, factory automation, smart retail, military, gaming and healthcare applications.
Features
-
High Endurance pSLC Flash Technology (up to 13,000TBW -256GB)
-
AES-256-bit Encryption & TCG-OPAL 2.0 Complaint*
-
Support DEVSLP Mode*
-
Low Power Consumption (Max. Read/Write <1.32W)
-
LDPC with RAID ECC
-
Thermal Protection Mechanism
-
SMART Toolbox for SSD health monitoring
-
Wide-temperature support: -40°C to 85°C
(* It’s optional function and support by specific firmware)
Application
-
Surveillance/Edge AI
-
Factory Automation
-
Smart Retail
-
Military/Defense
-
Gaming
-
Healthcare
Interface | SATA III |
Connector | Mini PCIe with SATA Pin out |
Flash | pSLC |
Capacity | 32GB~256GB |
Sequential Read (up to) | 550 MB/s |
Sequential Write (up to) | 510 MB/s |
Random Read (up to) | 49.5K IOPS |
Random Write (up to) | 78.5k IOPS |
Supply (V) | 3.3V + -5% |
Max. Endurance | 13,000 TBW (256GB) |
Max. Power Consumption (R/W) | 1.32/1.2W |
Idle | 0.175W |
Shock | 1500G0-P/0.5ms duration |
Vibration | 20Hz~80Hz/1.52mm
80Hz~2000Hz/20G |
Operating Humidity | 5%-95% RH, non-condensing |
Operating Temperature (Standard) | 0°C to 70°C |
Operating Temperature (Industrial) | -40°C to 85°C |
MTBF | 2.5M hrs |
Security (Optional) | TCG OPAL 2.0 Compliant |
ToolBox Utility | Supported |
Technologies | LDPC ECC, Thermal Throttling, SLC Cache, Wear Leveling, Bad block management, TRIM command, S.M.A.R.T.
|
Dimension | 50.8mm (L) x 29.85mm (W) x 4mm (H)
|
Form Factor | mSATA |
Solutions
Technologies & Add-On Services | |||
|---|---|---|---|
Advance Thermal Solution | ○ | - External or on-die thermal sensors
- Thermal Throttling to prevent SSD from overheating | |
Write Protect | ○ | When the write protect function enabled, SSD Controller will ignore any write/Erase command from host and only Read is permitted. | |
Destroy Erase | ○ | It erases the mapping table, user data, and SSD firmware. | |
Secure Erase | ● | It not only deletes the pointer/ mapping stable of the files but also resets all blocks and erases all user data. | |
Crypto Erase | ○ | Erase: table + Data (for support OPAL 2.0 SSD) | |
TCG OPAL 2.0 | ○ | Support AES 256bit hardware-based self-encryption and fully compliant with Trusted Computing Group (TCG) Opal Specification. | |
DEVSLP Mode | ○ | Electronic devices with low power consumption features (Partial mode, Slumber Mode, and DEVSLP Mode) generally have longer battery life, no overheating issues and also decrease the energy cost for charging. | |
ToolBox | ● | Self-Monitoring, Analysis and Reporting Technology, is a software that offers an easy way to analyze and manage your SSDs’ Health. |