E25B
SATA III 6Gb/s | M.2 2280
addlink E25B M.2 2280 SATAIII SSDs use industrial grade controller and is equipped with 112 Layer 3D TLC (BICS5) NAND flash to deliver performance with sequential read/write speed of up to 550/530 MB per second, making it a best industrial storage solution for embedded system. addlink E25B is compliant with TCG OPAL for data security. It also supports the latest LDPC ECC, advanced wear leveling, end-to-end data protection, power failure protection, and over-provision technology to ensure data accuracy and integrity for a longer SSD lifetime.
The E25B SSD is available in 240GB to 1920GB capacities and comes with addlink’s Toolbox software for easy management and real-time monitoring. It is an ideal solution solution for factory automation, smart retail, military, gaming, and healthcare applications.
Features
-
AES-256-bit Encryption & TCG-OPAL 2.0 Complaint*
-
Support DEVSLP Mode*
-
Low Power Consumption
-
Power Failure Protection*
-
LDPC with RAID ECC
-
Thermal Protection Mechanism
-
SMART Toolbox for SSD health monitoring
-
End to end data protection
-
Wide-temperature support: -40°C to 85°C
(* It’s optional function and support by specific firmware)
Application
-
Factory Automation
-
Smart Retail
-
Military/ Defense
-
Gaming
-
Healthcare
Interface | SATA III |
Connector | M.2 with B+M Key SATA Pin-out |
DRAM | DDR4 |
Flash | 3D TLC |
Capacity | 240GB~1920GB |
Sequential Read (up to) | 550 MB/s |
Sequential Write (up to) | 530 MB/s |
Random Read (up to) | 98k IOPS |
Random Write (up to) | 88k IOPS |
Supply (V) | 3.3V + -5% |
Max. Endurance | 3,259 TBW (1920GB) |
Max. Power Consumption (R/W) | 2/3W |
Idle | 1.2W |
Shock | 1500G0-P/0.5ms duration |
Vibration | 20Hz~80Hz/1.52mm
80Hz~2000Hz/20G |
Operating Humidity | 5%-95% RH, non-condensing |
Operating Temperature (Standard) | 0°C to 70°C |
Operating Temperature (Industrial) | -40°C to 85°C |
MTBF | 2M hrs |
Security (Optional) | TCG OPAL 2.0 Compliant |
ToolBox Utility | Supported |
Technologies | LDPC ECC, Thermal Throttling, SLC Cache, Wear Leveling, Bad block management, TRIM command, S.M.A.R.T.
|
Dimension | 80.00mm (L) x 22mm (W) x 1. 35 mm (H)
|
Form Factor | M.2 2280 |
Solutions
Technologies & Add-On Services | |||
|---|---|---|---|
TCG OPAL 2.0 | ○ | Support AES 256bit hardware-based self-encryption and fully compliant with Trusted Computing Group (TCG) Opal Specification. | |
Write Protect | ○ | When the write protect function enabled, SSD Controller will ignore any write/Erase command from host and only Read is permitted. | |
Quick Erase | ○ | Erase pointer/mapping table | |
Secure Erase | ● | It not only deletes the pointer/ mapping stable of the files but also resets all blocks and erases all user data. | |
Crypto Erase | ○ | Erase: table + Data (for support OPAL 2.0 SSD) | |
DEVSLP Mode | ○ | Electronic devices with low power consumption features (Partial mode, Slumber Mode, and DEVSLP Mode) generally have longer battery life, no overheating issues and also decrease the energy cost for charging. | |
Power Failure Protection | ○ | Power Loss protection (SSD) is provided using additional circuitry and capacitors installed to continue to provide power to the SSD in the event of a sudden power loss. | |
Advance Thermal Solution | ○ | - External or on-die thermal sensors
- Thermal Throttling to prevent SSD from overheating | |
ToolBox | ● | Self-Monitoring, Analysis and Reporting Technology, is a software that offers an easy way to analyze and manage your SSDs’ Health. |